Buy mesh for masonry wholesale with delivery and retail from a warehouse.
|
Masonry mesh from BP-1 with Ø 3-4-5 mm |
Masonry grid TM Cossack from a sheet. |
|
|
|
Masonry mesh price
Date 04.02.2022
| grid | wire VR-1 | length | width | Melk. wholesale | Wholesale |
| masonry | Ø | karti | cards | Mesh price / piece | Mesh price / piece |
| 50x50x3 | 2.8 | 2 | 0.25 | 29.28 | |
| 2.8 | 2 | 0.37 | 43.50 | ||
| 2.5 | 2 | 0.5 | 53.88 | 51.12 | |
| 2.8 | 2 | 0.5 | 67.92 | 64.38 | |
| 2.5 | 2 | one | 103.38 | 98.04 | |
| 100x100x3 | 2.8 | 2 | 0.37 | 32.34 | 30.66 |
| 2.5 | 2 | 0.5 | 32.82 | 31.14 | |
| 2.8 | 2 | 0.5 | - | - | |
| 2.5 | 2 | one | 57.54 | 54.60 | |
| 2.8 | 2 | one | 76.86 | 72.90 | |
| 50x50x4 | 3.8 | 2 | 0.5 | 120.00 | 113.82 |
| 100x100x4 | 3.8 | 2 | one | 136.02 | 129.00 |
The price of masonry mesh increases with a decrease in the cell and an increase in the diameter of the rods.
Below are the actual sizes of rods, cells and weight. The most reliable control for the amount of masonry mesh you buy is weight. The price of the masonry mesh depends on the seasonal factor.
| Cell, mm | map, m |
Fact* Ø VR-1, mm |
length of rods | bar cross ** | Theor. Weight, kg |
| 50x50 | 0.25x2 | 2.8 | 4 | 28 | 0.75 |
| 50x50 | 0.37x2 | 2.8 | 6 | thirty | 1.16 |
| 50x50 | 0.5x2 | 2.8 2.5 |
8 | thirty 28 |
1.55 |
| 100x100 | 0.37x2 | 2.8 | 4 | 17 | 0.72 |
| 100x100 | 0.5x2 | 2.8 2.5 |
five | 17 16 |
0.93 |
| 100x100 | 1x2 | 2.8 2.5 |
nine 8 |
17 16 |
1.75 |
| 50x50 | 0.37x2 | 3.8 | 6 | thirty | 2.11 |
| 50x50 | 0.5x2 | 3.8 | 8 | thirty | 2.83 |
| 100x100 | 1x2 | 3.8 | nine | 17 | 3.2 |
*- actual Ø is lower than nominal due to tolerances. At your written request, the tolerances may be reduced, but the actual weight and price will increase.
**- the smaller the number of rods in the masonry grid, the greater the cell tolerance.
If you want to buy a reinforcing mesh for masonry with other cells, bar diameters or card dimensions, order it and we will deliver it. Masonry mesh in Ukraine is not subject to mandatory certification. Here is a letter from standard metrology that confirms this.
At your request, we provide a quality certificate for pr. VR-1.
Ø wire BP not less than 3.0 mm and not more than 5.0 mm. This is due to the fact that in order to prevent corrosion, the masonry mesh must be protected by a layer of mortar with a thickness of at least 2.0 mm. In this regard, the total thickness of the seam, in which a rectangular masonry mesh of wire with a diameter of 5 mm is located, should not be more than 14 mm.
The distance between the rods should vary not less than 30 mm and not more than 120 mm. But we order masonry mesh with cells up to 250 mm, it is used not for masonry, but for reinforcing floors. The reinforcing mesh should have such dimensions that the ends of the rods protrude 2-3 mm beyond one of the inner surfaces of the wall or pillar. At these ends, the presence of a grid in the masonry is checked.
Cells 50, 100, 150, 200, 250 mm, they are rectangular and square.
Masonry grid is made in cards
Raw materials for the production of masonry mesh
Material for manufacturing - BP-1 according to GOST 6727-80.
We ship the grid for laying bricks and blocks from our warehouse in Zaporozhye. You can get wholesale lots by self-delivery from the warehouse or we will deliver it to you at the facility or at your warehouse in Ukraine.
Our sales geography is quite wide: Kyiv, Chernigov, Sumy, Poltava, Kharkiv, Odessa, Nikolaev, Kherson, Kirovograd, Cherkasy, Vinnitsa, Khmelnitsky, Rivne, Ternopil, Chernivtsi, Uzhgorod, Ivano-Frankivsk, Lviv, Lutsk and other cities of the regional and regional importance.
We have been selling reinforcing meshes since 1997, we have more than 70,000 buyers of legal entities and individuals, we have and maintain a reputation as a reliable supplier.
Reinforcing masonry mesh in construction
The photo shows the savings. Previously, there were laws and SNIPs in construction, which were tightly controlled. If , according to SNIP, 3 mm wire was to be used in the masonry . Then it was incorporated into the project and, accordingly, into the masonry itself. Now everyone needs a cheap masonry mesh to the detriment of standards and safety. It comes to the point of absurdity when builders ask for a masonry grid of 2.4-2.5 mm wire. The logic is clear - to quickly earn money and rent a cheap object. If the house collapses, then you will no longer find this foreman or FLP. Only large corporations that have been on the market for a long time value their reputation and adhere to building codes. They do not save on masonry mesh, because. they understand what this dubious opportunity to quickly "cut down money" can turn into.
It is used for reinforcing walls made of red and silicate bricks, strengthening piers, for foam concrete blocks and cinder blocks. The width indicates the scope of the masonry grid.
0.25x2 m - mesh for laying brick fences.
0.37x2 m - a grid for brickwork in 1.5 bricks.
0.50x2 m - mesh for brickwork in 2 bricks.
For reinforcing floors and cement screed , masonry mesh 1x2 m is most often used. VR-1 mesh is also used for installing temporary building fences, for strengthening road surfaces.
There is also an unusual use - for the manufacture of gabions , animal cages , frames for greenhouses.