Mesh setting and wire tensioning tool

pipe hammer

The tool is used as a hand hammer for driving poles, pipes, angles, ground rods.
It consists of a steel pipe welded on one side. Two longitudinal handles are welded on the sides of the tool.
A piece of heavy steel circle is welded into the upper part of the pipe, which acts as a hammer.

More about the tool >>>

Tensioner for a wire and a grid of the Polish production.

Read more about the tensioner here...

Tool for tensioning wire and creating trellises

Max Tensor - A tool for tensioning the wire and connecting the edges of the mesh. It works on the principle of pincers, where, due to the large lever, the wire is pulled and fixed with special clamps Max Tensor .
Read more about the tool and video how it works here...

Mechanical hand tool for stapling nets, cages, barbed wire and gabions

Pincers of various types and for various applications. Designed to connect rolled fences and fasten the metal mesh to the tension wire and to the poles.
Also, with the help of staples, you can fasten egoza and barbed wire together.

Pliers FP 216
Tool for connecting meshes and cages with staples.

Soft grips and long
staple shop.

Pliers J 116/J 120
made in taiwan
A mechanical tool with a magazine, used to fasten cages and nets with staples with a diameter of 1.3 mm and 2.0 mm.

Weight: 400 gr.
Magazine volume: 36 pcs.

HR Tool

Pneumatic crimping tool that allows you to produce
crimping with staples in hard-to-reach places.
Tool options:
Length 35.5 cm
Width 9 cm
Height 20.5 cm
Weight 1.54 kg

Staple size and model:

• Ø 4.5 mm - HR1845
• Ø 5.0 mm - HR1850
• Ø 5.5 mm - HR1855
• Ø 6.5 mm - HR1865
• Ø 8.0 mm - HR1880

Wire diameter 1.8 mm

for fixing gabions and aviaries with staples
Manual crimping tool.

Simes Mod 118 - No staple magazine.
Simes Mod 119 - with staple magazine.

The staple wire diameter is 1.8 mm.

Pneumatic pliers cope much faster with viscous mesh, wire than mechanical ones. Without effort, both fragments of cells and gabions are connected using staples made of thick wire.

Pneumatic pliers AC01 for fastening cages, nets, barbed wire with staples

Length 27.0 cm
Width 9.5 cm
Height 20.0 cm
Weight 1.55 kg
Operating pressure 5 - 8 bar
Magazine volume 100 - 120 pcs

The principle of operation of the tool on the video here ...

Pneumatic pliers AC03 for stapling cages, nets, barbed wire

Length 35.5 cm
Width 10.0 cm
Height 20.0 cm
Weight 1.48 kg
Operating pressure 5 - 8 bar
Magazine volume 100 - 120 pcs

Pneumatic pliers AC50M for stapling gabions and aviaries
It is the largest pneumatic crimping tool.

Ideal for strengthening the coast. Currently widely used, taking into account the state of the environment.

Curved hand tool with hook for tying wire.
A 3-fold increase in labor productivity when working with knitting wire is achieved using manual hooks.
This tool is always available.

The steel hooks are nickel plated for added durability.
The steel on the hooks itself also has increased strength, because its composition is very close to that of St10.

More about the tool >>>

Semi-automatic tool with wire tying hook and tension spring.
A 3-fold increase in labor productivity when working with knitting wire is achieved using semi-automatic hooks.
This tool is always available.

The steel hooks are nickel plated for added durability.
The steel on the hooks itself also has increased strength, because its composition is very close to that of St10.

More about the tool >>>