Welding wire price wholesale and retail, copper-plated wire

Welding wire Sv08A, Sv08G2S, Sv08GA, Sv08KhM, Sv10G2, Sv10NMA always in stock.
Additionally, you can buy welding flux in bags from us.

Welding wire SV08 (A, AA) GOST 2246-70

Welding wire CB08 (A, AA) is used in automatic machines under a protective layer of carbon steels with a yield strength of 235-285 MPa, the manufacture of electrodes intended for welding low-carbon and low-alloy steel, surfacing. Suitable for semi-automatic and gas welding .

"A" at the end of the designation indicates an increased purity of the metal, the second "A" indicates a reduced content of sulfur and phosphorus compared to Sv08A.

From SV08AA produce electrodes with increased viscosity of the metal and the seam. CB08(A) is packed in paper and polyethylene. Can also be supplied without packaging.
Import analogues: ITALFIL IT-SAW1, IT-SAW2, Boehler Union S2, ESAB OK Autrod 12.10, OK Autrod 12.20, LINCOLN L60/61, OERLIKON OE-S1/2.

In stock welding wire in heavy coils weighing 1-1.3 tons and coils of 80-100 kg. The price for CB08A is in the price list.

Welding wire Sv08G2S, polished and copper-plated

Production is carried out in accordance with GOST 2246-70.
Production of copper-plated SV08G2S according to TU-U 322-4-392-96.
Import analogues ER 70S-3,6,G, ESAB OK AristoRod 12.50, OK AristoRod 12.63, Boehler EMK 6 D Top, EMK 8 D Top, ITALFIL IT-EVO 2 / 3, LINCOLN UltraMag (SG 3), Supra MIG, Supra MIG Ultra.

Welding copper-clad wire

It is used for mechanized work in protective gases of responsible and general purpose structures.

Along with copper-plated, polished welding wire deserves the attention of specialists. In the first photo (there is an increase), a welding seam formed by a polished wire, and in the second - a regular unpolished one. The price for welding SV08G2S in the price list.

Welding wire SV08G1NMA for steels up to 25 mm

The electrode is fed and the arc is moved along the seam in a mechanized mode under the material to protect low-alloy steels of an increased level of strength and cold resistance from atmospheric air. Designed for single-pass one- or two-sided welding of steels up to 25 mm thick of various types of alloying and strength categories (K55-K65). Price SV08G1NMA in the price list.

Welding wire SV08GA in coils and on cassettes

This is the best welding wire for automatic welding under a protective layer of carbon steels with a yield strength of 235-440 MPa (bridge structures, supports, pipes, pipelines and boilers operating at high pressures and temperatures).
It is also used for welding low-alloy, low-carbon, carbon steels of the 10KhSND type in a gas mixture (Ar-80% + CO2-20%), in pure CO.
It is used for welding welded pipes and in power engineering, used in the production of gas and oil pipelines of large Ø, designed for high working pressure at low temperatures. SV08GA is approved by the Maritime Register of Shipping in combination with AN-42 and AN-47 fluxes. It is used to make electrodes.
Work is done with direct current.
Outwardly, it differs little from other brands, it is supplied in coils wrapped in a polymer film.
If you decide to buy SA08GA on cassettes, then these will be metal cassettes of 15 kg, packed in a polymer film and placed in cardboard boxes.
Wire SV08GA we have in stock Ø from 0.8 to 6 mm, copper-plated, without copper and polished. Most often they buy SV08GA 2 mm or more.
Available in stock CB08ga and in coils. The price for CB08ga is in the price list.

Welding wire SV08GSNT only wholesale

Designed for mechanized welding in shielding gases, used in shipbuilding and chemical engineering.

Welding low alloy wire SV08XM

Copper-plated low-alloy chromium-molybdenum welding wire, which is used for automatic machines that weld XM type and low-alloy steels in a gas mixture (Ar-80% + CO2-20%), under the protective material of oil and gas pipelines and metal structures for critical purposes from carbon and low-alloy steels with a yield strength 235-440 MPa (structures of bridges, supports, pipes, pipelines and boilers operating at high pressures and temperatures). Often used with AN-348 flux. Work with the help of SV08XM is carried out using direct current of reverse polarity.
Import analogues: ER 100S-G, ESAB OK AristoRod 55, OK Autrod 13.12, OK Autrod 13.10SC, Boehler DCMS-IG/UNION I CrMo, ITALFIL IT-SGCrMo1, EVO T1, IT-EB2.
We store SV08XM copper-plated and uncoated in coils and on cassettes in our warehouse. It is a universal wire that can be used for welding both low carbon steels and other high-tech steels. Price for SV08XM in the catalog.

Welding wire SV10NMA

Automatic welding of low-alloy grades of increased strength and cold resistance of metal structures for critical purposes (structures of bridges, supports, boilers, pipes and pipelines operating at high pressures and temperatures).

SV10NMA is manufactured in accordance with GOST 2246-70 and TU U 322-4-392-96, TU 14-15-373-95, DSTU 3671-97.
Grades are available uncoated, for low carbon steel, and copper plated for low alloy and carbon steel structures.
Copper-plated wire is designed to achieve the maximum quality of the seam and joints that can withstand fairly high temperature and shock loads, and have rupture resistance.
It is used for structural and shipbuilding steel, large-diameter pipes, as well as for vessels and containers under high specific pressure.
Available SV10NMA from 0.8-6 mm, and copper-plated 0.8-1.6 mm. Price SV10NMA in the catalog.

Wire for welding SV10G2

Automatic welding of carbon grades with a yield strength of 235-440 MPa. The price of Sv10G2 is in the price list.

Wire for welding SV10GA

Automatic welding of carbon and low-alloy grades with a yield strength of 235-440 MPa. Price in the price list.

Wire for welding SV10GN

Mechanized submerged arc work in shipbuilding and chemical engineering.

Welding wire marking and symbols

The first two letters "CB" mean that this is a welding wire.
The two digits following them indicate the carbon content in hundredths of a %.
Then come the letter designations of the elements that make up the wire. When the content of alloying elements is up to 1%, only the letter of this element is put, and if the content of alloying elements is more than 1%, then the percentage of this element in whole units is indicated after the letter.

Basic requirements for welding wire

The chemical composition of the welding wire must correspond to the composition of the metal from which the welded parts or elements are made, the wire must melt at a temperature practically equal to the temperature of the metal, the melting must be uniform, and the wire itself must not be dirty or oxidized.

Fused welding flux AN, OSC, ANC

With welding wire, you can also buy welding fused flux from us. It is made according to GOST and TU and has a quality certificate.
Brands:

• AN-348-A, OSC-45M, AN-348-AM
• AN-47, AN-47D, AN-47DP
• AN-348-APM, AN-60, AN-60M
• AN-20S, AN-26S, AN-26P
• OSC-45, ANTs-1A, AN-67

Coils and coils of welding wire

SV08, SV08A with diameters of 2-6 mm are supplied in heavy-duty coils of 1-1.3 tons. The outer diameter of the coil is 830-850 mm, the height of the coil is 700-1000 mm.
The rest of the wire is supplied in coils:
Up to 1 mm coil weight up to 15 kg, outer diameter 220-260 mm, coil thickness 60-80 mm.
Over 1 mm wire is supplied in coils of 80-120 kg, outer diameter 630-730 mm, thickness 160-180 mm
Copper-plated wire is supplied in coils and on cassettes of 5-15-18 kg. The outer diameter of the cassette for 5 kg is 200 mm, for the rest - 300 mm, the inner diameter of 5 and 15 kg cassettes is 51 mm, for 18 kg - 180 mm
Cassette width for 5 kg - 53 mm, for other cassettes 89 mm.

Welding wire in coils	Welding wire on coils	Welding wire is packed in paper and polyethylene.

Chemical composition of welding wires

The chemical composition of the welding wires affects the properties of the welding wire and welds.
Carbon content C: As the carbon content of the welding wire decreases, the weld becomes more ductile.
Phosphorus P and Sulfur S content: Reducing the phosphorus and sulfur content increases the reliability of the weld
The content of manganese Mn: Is in the range of 1-2% and strengthens the weld.
The content of aluminum, titanium and zirconium - being very strong deoxidizers, are used in extremely small quantities (up to 0.2% in total).
The welding wire contains alloying elements such as manganese, silicon, nickel, chromium, titanium and others.

Chemical composition of steels for low-carbon wires

Delivery in Ukraine and the price of welding wire

We deliver to any city in Ukraine: Vinnitsa, Lutsk, Dnipro, Donetsk region, Zhytomyr, Uzhgorod, Ivano-Frankivsk, Kyiv, Kropyvnytskyi, Luhansk region, Lviv, Nikolaev, Odessa, Poltava, Rivne, Sumy, Ternopil, Kharkiv, Kherson, Khmelnitsky , Cherkasy, Chernihiv, Chernivtsi, Mariupol, Krivoy Rog and for export.

We have a logistician in our staff, whose task is to check transport companies, carriers for safety. In our database, we only have proven carriers with whom we have been cooperating for more than 10 years. If the car belongs to an owner unknown to us, then we check it and collect recommendations before sending the cargo. Therefore, it is more profitable for you to order from us with delivery and not worry about your goods.

Weight per meter of wire