Uzelfix® mesh is the most durable farm mesh for fences and territory fencing - an alternative to chain-link fence with thick wire or canned mesh. Sometimes it is called: forest mesh, fixed knot mesh, farm mesh.
The strength of the mesh gains due to:
- high-carbon wire d. 2.5 mm;
- Uzeltfix® system, which connects the warp wires and cross wires.
Doesn't sag.
The knot shape is on the left in the photo.
Specifications of the mesh for the fence Uzelfix®
- Wire diameter 2.5 mm;
- Wire base material: high-carbon galvanized (tensile strength 1300-1500 MPa (N/mm2) , (on request low-carbon 540-1080 MPa (N/mm2)) ;
- Uzelfix® connections are made of heat-treated 350-450 MPa (N/mm2) galvanized wire 2.0 mm.
- Cell width 150 mm (optional 300 mm)
- The height of the forest mesh is 1.55 m, 2 m and 2.44 m.
- Roll length 1.55 m high - 50 m, 2 m high - 40 m, 2.44 m high - 35 m.
- Galvanizing from 60 g/m2, (under the order from 220 g/m2).
Layout of variable cells in the Uzelfix® grid for fences and fencing
The height of the lower cells is 76 mm, the upper cells have a height of 178 mm.
Map with places where you can buy Uzelfix mesh
You can buy wholesale batches of Uzelfix mesh from us at the enterprise with delivery.
If there is no such place of sale in your city yet and you are a trading company, then call us. You can become our only representative in the city.
Comparison of low carbon and high carbon wire in a metal mesh
Comparison of chain-link fence and Uzelfix® mesh fence
| Chain link fence | Mesh fence Uzelfix® |
| Fence posts are installed every 2-2.5 m | Fence posts are installed every 4-6 m. This reduces the cost of the fence |
| Made from low carbon galvanized wire | Made from stronger high carbon galvanized wire |
| Tensile strength 540-1180 N/mm2 | Tensile strength 1300-1500 N/mm2 |
| Pulling out one spiral leads to an opening in the fence | The fence continues to function even when cutting part of the wires of the mesh web |
| If you hook one spiral and pull, then the mesh fabric will be deformed | If you hook the mesh on the wire and pull, then after releasing the wire will fall into place, like a bowstring |
| A tree falling on a chain-link fence destroys the fence | A tree, falling on a fence made of Uzelfix® mesh, remains hanging on the upper wires of the fence without damaging the mesh fabric. |
| When a car hits a fence, the mesh is damaged | When a car hits a fence, the car stops. It can't break high carbon wire |
| The same cell at the bottom and top of the fence canvas | Variable cell height. The cell is narrower at the bottom than at the top. |
Description of the design of the Uzelfix® mesh for fences
The longitudinal and transverse wires of the mesh at the intersections are interconnected by knots of a special form - Uzelfix®. The bottom cells are smaller than the top ones. This is because for large animals it makes no sense to make a small cell.
It has been experimentally established that with such a connection of wires, the loads under mechanical stress are distributed evenly over the horizontal and vertical wires and at the connection nodes, and even if one of the wires is torn, the neighboring fixing nodes will hold the structure and further destruction of the mesh will be stopped.
Using the Uzelfix® mesh
The Uzelfix® mesh is used for hunting grounds and lands, in forestries as a hold and fencing for wild large animals. Uzelfix® mesh fencing will not be able to tear wild boar, bison, deer, elk, roe deer, wolf, mouflon and even brown bear.
Uzelfix® mesh is designed to protect against large strong animals in agriculture. This mesh is suitable for fencing cattle: cows, bulls, rams, sheep, goats, etc. Also, the Uzelfix® mesh will be an excellent mesh for creating horse pens.
Due to its high strength, Uzelfix® mesh should be used as aviary mesh in zoos. The mesh is suitable for keeping exotic animals: the mesh is used for keeping camels, ostriches, bison, lynx, etc.
Due to its application, the fence mesh Uzelfix® can be called: fixed knot mesh, forest mesh, aviary mesh, zoo mesh, deer mesh, boar mesh, bear mesh.
Installation of a fence from the Uzelfix® mesh for fencing the territory
This means that it must be installed on equally strong pillars, in order for the structure to withstand the pressure of a wild beast. Because of this, strong metal poles, concrete poles, or strong rail steel poles can be used for the mesh.
We recommend using Kazachka® 320 metal posts. They have increased durability, because they are covered with a zinc layer of 320 g/m2 and are sufficiently durable. In the gaps between expensive pillars, you can use Kazachka Y-shaped pillars. This saves significant funds for the installation of the fence.
To install the Uzelfix® mesh, the posts are installed at intervals of 4 to 6 m.
The Uzelfix® mesh is made of high-carbon wire and is therefore quite heavy, so the poles for installation must be concreted. How to mount poles here.
For mounting the mesh Uzelfix® we supply:
Wire tensioner, price ;
Galvanized wire, price ;
pipe hammer for posts, price .
To increase the protective properties of the mesh fence Uzelfix® buy:
barbed wire single-core and double-core, price;
barbed wire Alebarda®, price
knotfix. epkjabrc, eptkabrc, epkjabrc, uzelfkis®, vuzelfix®