Knitting wire in coils from 60 kg:
- Uncoated knitting wire (diam. 0.4 - 6 mm)
- Galvanized knitting wire (dia. 0.8 - 5 mm)
The wire is ordinary and with light annealing.
In addition to tying, annealed wire is used to make woven mesh and netting .
Buy knitting wire in Ukraine
can be self-delivery from our warehouse or with delivery in Ukraine - Vinnitsa, Kropyvnytskyi, Poltava, Kharkiv, Dnipro, Rivne, Kherson, Sumy, Cherkasy, Zaporozhye, Nikolaev, Chernihiv, Odessa, Kyiv and to any locality.
We have a full-time logistician who organizes transportation and checks transport companies and vehicles. Therefore, you can not worry about the safety of delivery of knitting wire.
Knitting wire soft in accordance with GOST 3282-74
Wire Packing:
annealed knitting wire in coils 60 -140 kg
Wire tying tools
A 3-fold increase in labor productivity when working with Kazachka's knitting wire is achieved with the help of hooks.
The steel hooks are nickel plated for added durability.
The steel on the hooks itself also has increased strength, because its composition is very close to that of St10.
As a knitting wire, you can use galvanized heat-treated wire, which is supplied by PE Metizy-94.
Binding wire application
Knitting wire is used for tying car doors, tying construction fittings, meshes for reinforcement, for tying small parts, for tying bags and Big Bags.
Knit reinforcement with soft wire or cook?
Why use knitting wire if you can cook the frame. And easier and cheaper.
Of course, and now look at what it can result in (click on the photo)
Why did cracks appear on the window lintels?
Above them is a monolithic armored belt, which is reinforced with high-strength reinforcement welded together.
Why doesn't high-strength construction add strength? After all, a welding connection is definitely stronger than a connection using a knitting wire?
Yes, stronger.
Let's just go back to the production of rolled metal products.
At the end of the last century, some metallurgical plants, instead of using manganese, began to use the surface hardening procedure to give strength.
With a sharp cooling, it became much stronger. As a result, huge savings in expensive manganese and cheaper rolled products.
What happens as a result of metal welding, instead of using a binding wire?
Heating of the welding site to the melting point and then slow cooling of the welding joint.
This means that the metal at the welding site was released. Made it softer and more flexible. Significantly worsened the strength characteristics of high-strength reinforcement.
That is why the structure, where welding was used, did not fulfill its bearing function and began to put pressure on the jumpers, destroying them. About 15 years ago it was possible to weld rebar, but today the advice of builders on the use of welding instead of tying rebar with wire causes significant harm to their customers. The photo you see is proof of this harm.
Therefore, we recommend that you use knitting wire during construction.