Model 04 plastic picket fence,Dimensions (Height x Width between pillar axes):
Section 1100 x 2410mm, 1500 x 2410mm;
Go to the GALLERY of plastic fences installed by our customers.
You can make an order or get advice by phone: 067-612-92-67 .
A plastic fence made of a flat picket fence consists of the following parts:
Shtaket
Fence length for a fence 1.1 m high :
| Picket fence length 1.5 m high:
|
The section consists of 15 fence profiles with holes for fastening.
Plastic connector
Has wedge-shaped latches. During assembly, connecting
elements snap into place, and the ability to remove the picket fence without
there will be no damage to the mount.
crossbeams
2 pcs. Top and bottom, height 89 mm,
51 mm wide and 2380 mm long.
The difference between the crossbars is
only that the bottom
crossbar reinforced with
aluminum profile:
Wickets and gates:
Maximum overall dimensions.
- height 1050 mm and 1450 mm;
- width 1000 mm.
Gate dimensions:
- height 1050 mm;
- width 2720 mm.
- height 1500 mm;
- width 3000 mm.
accessories
loops
Hasp horizontal
Hasp vertical
pillars
Flat picket fence post dimensions:
- 102x102x1750 mm;
- 102x102x2200 mm.
The thickness of the walls of the columns is 3.8 mm.
The height of the section, wicket and gate is calculated from the level of the site for installation, provided that the distance to the lower edge is up to 15 cm.
The mounting holes on the plastic fence posts are rectangular in shape and measure 51x89 mm.
865 mm - the size from the bottom edge of the post to the bottom edge of the hole (important for concreting).
intermediate posts
with two holes
on one line
Final pillars
with one hole
corner posts
with two holes
angled
Reinforced poles
with aluminum profile
inside the post
"Gothic" stub
Fence assembly.
- Territory marking.
- Dig holes for the posts, using the length along the axes of the posts.
- Concreting of the first column.
- Installation of the second pillar, but do not temporarily concrete it.
- Installing the bottom rail (with aluminum profile) and the top rail into the grooves on the posts. When the crossbeam entered the groove and snapped into place, it will no longer be possible to remove it back.
- Fastening the fence to the crossbars using a special connecting element.
- Concreting of the second column.
- Repeat the operation with the following pillars and panels according to P. 4-7. before installing all pillars and sections.
- After installing the entire fence, glue the covers (plugs) on the posts.
See also information about other types of plastic fences TM Kazachka or small architectural forms , for this, click on the name or image of the required product:
We import plastic gates and gates ourselves, so the price will be the lowest in Ukraine. Metal gates and wickets are produced under our Kazachka trademark, so the price will also be acceptable.