Solid fence with bar

Model "13" solid fence with bars,
dimensions (Height x Width between the axes of the pillars) .
- section 1800 x 2440mm, 2000 x 2400mm,

The height of a solid fence, wicket and gate is calculated from the ground to the top, provided that the distance between the ground and the lower edge is up to 10 cm.

Go to the GALLERY of plastic fences installed by our customers.

Solid panels

8 panels that fold into one solid section ,
thanks to special locks with 7.5 mm slots.
Each has stiffeners and is visually divided into 4 strips of 71.7 mm.
Dimensions of solid fence panels:
- length 1015 mm (for a fence 1800 mm high);
- width 287 mm;
- thickness 22.2 mm.

Top bar

Dimensions:
thickness 51 mm,
height 89 mm,
length 2387 mm.

Bottom bar with aluminum profile.

Dimensions:
thickness 51 mm,
height 152 mm,
length 2387 mm.

middle bar

Connects the bottom of the panel fence to the top of the lattice.
Dimensions:
thickness51 mm,
height 152 mm,
length 2387 mm.

Grille fixing profile

4 pieces of U-shaped PVC fasteners 1.5 mm thick.
These profiles are fixed on the edges of panels and gratings,
adjacent to the pillars.

Lattice

Dimensions:
- width 428 mm,
- length 2306 mm:

Wickets and gates with bars

- gate 1750 x 1000 mm (maximum overall dimensions);
- double swing gates
1750 x 2720 mm, 1750 x 3000 mm (maximum overall dimensions)

Wickets and gates are deaf

Maximum overall dimensions.
Gate:
Height 1950 mm.
Width 910 mm and 1000 mm.

Double swing gates:
Height 1950 mm.
Width 2720 mm and 3000 mm

accessories

loops

Hasp horizontal

Hasp vertical

Solid fence posts

The dimensions of the mounting holes of the poles for solid fence:

• top and bottom 51x89 mm;
• medium 51x152 mm.

Wall thickness - 3.8 mm.

Dimensions for solid fence:

• 127x127x2400 mm;
• 127x127x2500 mm. 750 mm - size from the bottom edge of the column to the bottom edge of the hole (for concreting);
• 127x127x2900 mm.

Intermediate
with two holes
on one line

Final
with one hole

corner
with two holes
angled

Reinforced
with aluminum profile

"English" stub

Steps for installing a solid fence :

1. Territory marking.
2. Dig holes for the supports, using the length along the axes of the pillars.
3. Concreting of the first column.
4. Installation of the second pillar, but do not temporarily concrete it.
5. Installation of the lower crossbar (with aluminum profile) into the grooves on the posts. When the crossbar entered the groove and snapped into place, it will no longer be possible to remove it back.
6. Connecting the U-rail to the end plastic panel.
7. Installation of plastic panels in the lower crossbar and coupling with each other using a special lock at the end.
8. The grate connected to the U-profile is joined to the top and middle rungs.
9. The upper and middle crossbars assembled with the grate are connected to the posts. When the crossbar entered the groove and snapped into place, it will no longer be possible to remove it back.
10. Concreting of the second support.
11. Repetition of the operation according to P. 4-10.
12. After installing a solid fence, glue the covers (plugs) on the posts.

We import plastic gates and gates ourselves, so the price will be the lowest in Ukraine. Metal gates and wickets are produced under our Kazachka trademark, so the price will also be acceptable.

More details by phone. 067-612-92-67 .

Click on the name or image of a particular type of plastic fence TM Kazachka in order to view information about it:

Flat picket fence

plastic grill

Solid fence with closed picket fence