Chain link mesh machine * manual and semi-automatic *

Wire mesh machines

The most common metal mesh is the chain-link mesh .
You can buy it at Metizy-94.

We do not sell machines for the production of chain-link mesh, but we can recommend our partners who produce them or sell wire for the production of mesh Netting.

Wicker mesh Chain-link with rhombic and square cells, is made by interlacing flat spirals from non-galvanized or galvanized wire into one interleaving.

Chain link machine base

The basis of any machine for the production of woven mesh is an auger that forms the pitch of the spiral and a knife that forms the spiral itself.

1 screw, 2 knife

Manual looms for weaving netting

Manual looms are the simplest net weaving device.
Such a machine does not require special production conditions and can be placed in any indoor area where there is enough space.
Recommended as a "Do-it-yourself business at homeen" or for the own needs of any enterprise.

Productivity 3-5 rolls per shift;
It does not require a special room, it is attached to a regular workbench;
Complete absence of noise, as the drive is manual;
Full control of weaving and 100% absence of defects;
Low, really affordable price and quick payback;

Free training of the customer or his employee is carried out within one working day.
Consulting support is provided, as well as a stable supply of consumables and spare parts.

Semi-automatic machines for chain-link

Mesh semi-automatic machines: these are mainly SKET UDAFV-60/II equipment for the production of woven mesh with 25-60mm mesh, UDAFV-20/I, which are used in the production of mesh Rabitsa with 10-20mm mesh and UDAF-10 for making grids the Chain-link with cells 3-10 mm.

On the UDAFV-60/II netting machine , it is possible to produce about 500 m2 of netting with a cell of 50mm and a roll size of 1.5x10m in an 8 hour shift. or about 200 m2 of mesh with a cell of 25 mm and a roll of 1.5x10m.

Greater productivity is achieved primarily due to the fact that this semi-automatic machine has two unwinders at once and it forms two spirals at the same time.

Changing from one size to another mesh size on a semi-automatic mesh can sometimes take up to 2-3 hours.

Therefore, the manufacturer is reluctant to place orders with quantities less than the daily rate of machine productivity.

For smaller orders, you will have to wait for a similar order from another client, or just wait a long time (if you are not a VIP client).

Semi-automatic machines of Ukrainian production

Semi-automatic machine with electronic control unit.

Recommended as a stand-alone small business or stand-alone line of business for a medium-sized business.
- The actual productivity of the machine is 16-22 standard rolls per shift;
- The parameters of weaving the mesh fabric (height, width of the fabric, knife stop angle, changing the weaving modes) are set by the operator using the electronic control panel;
- The ability to change the weaving speed allows you to choose the optimal speed for a specific mesh size and wire thickness, and also provides the ability to work with low quality wire;
- Blocking of the machine in case of detection of a violation of the technological process with the issuance of an error code to the operator's console.