50x50 Galvanized cha

Buy mesh chain-link galvanized 50x50 in rolls.
A roll of galvanized chain-link 50x50x2.2 can be of a standard size, and also be made to order up to 4 meters high.

The standard size of a roll of galvanized chain-link mesh 50x50x2.2 is as follows:

• chain-link roll height 1.5 m;
• chain-link roll length 10 running meters

The diameter of a roll of galvanized mesh netting 50x50x2.2 depends on the type of winding it on a roll: in the case of compact winding of a roll, its diameter is smaller than that of a conventional mesh roll.
Mesh rolls are wrapped around the edges with paper, burlap or polymer film to prevent chain-link adhesion.

The grid the Chain-link galvanized 50х50 mm is made from a galvanized wire low-carbonaceous . The specific density of zinc on galvanized wire OK is not less than 60 g/m ² .
The cell at the chain-link has the shape of a square.

The production of galvanized mesh Chain-link 50x50x2.2 takes place in accordance with GOST 5336-80 in strict accordance with the tolerances:

• tolerance on the size of the chain-link cell is not more than +5 mm;
• tolerance for the width of the chain-link mesh 50_50_2.2 - 56 mm.

The tolerance for the diameter of galvanized wire is prescribed in GOST 3282-74 and cannot exceed 0.1 mm.
The theoretical weight of 1m ² galvanized chain-link mesh 50x50 is 1.35 kg. The price of a roll of mesh Chain-link galvanized 50x2.2 depends on the volume of the order.
The grid the Chain-link galvanized 50х50х2,2 is applied to a protection of territories, cages for animals.