Chain-link 50x50x1.6 is made from low-carbon wire with a diameter of 1.6 mm, galvanized and uncoated. The density of zinc on the wire is at least 50 g/m 2 . Mesh Chain-link 50x50 with such a density of zinc on the surface of the wire will last under normal conditions for at least 7 years before it starts to rust.
The production of Rabiya 50x50 is carried out in accordance with GOST 5336-80.
GOST provides for tolerances for Chain-link 50x50:
- grid width - 56 mm;
- for the cell, the maximum deviation of the arithmetic mean size is not more than +5 mm.
GOST 3282-74 provides for a wire diameter tolerance OK : for a wire with a diameter of 1.6 mm, the tolerance can reach up to 0.1 mm.
The chain-link is supplied in rolls, wrapped in burlap, paper or polymer fabric at both ends.


Also, the roll is tied with low-carbon wire.
The chain-link roll 50x50 has the following dimensions:
- roll height 1.5 m, although under the order it can be made up to 4 m high;
- roll length 10 r.m.
Rolls of the Chain-link 50х50х1,6 can be usual or compact. In rolls of compact winding, a 50x50 chain-link spiral is placed in an adjacent spiral.
The diameter of a compact roll is smaller than that of a conventional roll.
But compact winding into a roll requires expensive equipment.
The cell at the grid Rabitsa 50x50 has the shape of a square.
The chain-link 50x50x1.6 is used in construction, for fencing various territories, for making cages.
A 50x50 chain link looks like this:
For enterprises that are required to purchase only certified products, we made a request to "Standartmetrology" and together with the products we give a letter stating that this product is not included in the "List of products that are subject to mandatory certification." If the product is certified, then we give a certificate. View letter.
The price of the Chain-link 50x50x1.6 depends on the volume of the order, so it's better to call and you will find out all the information you need about the Chain-link.
The wire with a diameter of 1.6 mm is very thin, and the chain -link from it will be fragile, and, accordingly, the fence from such a mesh will turn out to be very unstable. To save money on an inexpensive fence, use the Cossack lightweight mesh .