Rolls of mesh Rabitz 45x45 can be up to 4 meters high, but the mesh of this height is made to order.
A standard mesh roll Rabitz 45x45x2.5 has a height of about 1.5 meters and a length of up to 10 running meters.
Mesh Chain-link 45x45 can be packed in rolls of standard or compact winding.
The advantage of a compact mesh roll is that it is more convenient to transport as it takes up less space. But for the implementation of compact winding on a roll of mesh Chain-link 45_2.5, expensive equipment is needed, with the help of which the spiral of the woven mesh 45x45 fits into the adjacent spiral.
Rolls of woven mesh 45x45x2.5 are tied with annealed wire and wrapped with burlap, paper or polymer fabric at the edges.
The material for the manufacture of mesh Chain-link 45x45x2.5 is OK wire , made in accordance with GOST 3282-74.
Wire for mesh Chain-link 45x45 can be galvanized and non-galvanized.
Galvanized wire OK with a diameter of 2.5 mm according to GOST must contain at least 60 g / m 2 zinc.
A woven mesh 45x45 made from wire with this density of zinc on the surface will resist corrosion for more than 8 years under normal conditions of use.
The woven mesh 45x45x2.5 is characterized by a clear cell size of 45 mm and an OK wire diameter of 2.5 mm.
Grid cell Chain-link 45x45x2.5 has a square shape.
Wicker mesh 45x45x2.5 is manufactured in accordance with GOST 5336-80.
This GOST provides for the following tolerances for the chain-link mesh 45x45x2.5:
- in terms of cell size, the deviation should not exceed +4.5 mm;
- the deviation of the grid size in width is not more than 50.4 mm.
GOST 3282-74 provides for a deviation in wire diameter of not more than 0.1 mm.
This does not mean that the entire woven mesh 45x45 is made with exactly these dimensions, just such deviations are possible and are provided for by GOST.
The price of the grid Chain-link 45x45x2.5 depends on the volume of the order, so it's better to call and you will find out all the information you are interested in on the grid Chain-link.
The use of mesh Rabitsa 45x45x2.5 is very diverse: this is the manufacture of cages, fences, reinforcement and much more
For enterprises that are required to purchase only certified products, we made a request to "Standartmetrology" and together with the products we give a letter stating that this product is not included in the "List of products that are subject to mandatory certification." If the product is certified, then we give a certificate. View letter.
A fence made of mesh Rabitsa 45x45x2.5 will not be cheap, since the mesh itself with a cell of this size and relatively thick wire is expensive.
But you also need poles that are installed after 2.5 meters.
For a cheap fence, a lightweight Cossack mesh is used.
Making a fence from such a grid, you also save on poles, which you need almost half as much as for the Chain-link.