Tolerances for the chain-link mesh 35x35 are provided by GOST 5336-80 and 3282-74 and are as follows:
- in the cell, the positive tolerance is not more than +3.5 mm;
- width tolerance no more than - 39.2 mm;
- wire diameter tolerance -0.1 mm.
Wicker mesh 35x35x2.5 is packed in rolls.
Most often, the dimensions of a roll of woven mesh 35x35x2.5 are as follows:
- height 1.5 m;
- length about 10 p.m.
Wicker mesh 35x35 to order can be made up to 4 m high.
Rolls of woven mesh 35x35 are wrapped at the edges with thick paper, polymer film or burlap to prevent injury, and also tied with wire in the middle to avoid roll unwinding.
Grid Chain-link 35x35x2.5 is made of galvanized or non-galvanized wire . In the case of galvanizing, according to GOST 3282-74, a wire with a diameter of 2.5 mm must contain at least 60 g / m 2 of zinc.
The cell at the grid is wicker 35x35 square.
The price of the mesh Chain-link 35x35 depends on the volume of the order.
The chain-link mesh 35x35 is used for:
- plaster reinforcement;
- production of sieves, fences, partitions, cages.
Wicker mesh Chain-link 35x35 looks like this:
In order to see how a woven 35x35 grid looks like in full size, attach a ruler to the monitor screen, hold down the Ctrl key and scroll the mouse wheel until the divisions on your ruler coincide with the divisions on the image.
A fence made of mesh Chain-link 35x35x2.5 will be reliable and durable, but expensive, and if you want a cheap wire fence, then pay attention to the Cossack lightweight mesh .