When buying mesh Chain-link 35_2.2 , do not be alarmed if the mesh is made of wire with a diameter of less than 2.2 or with a mesh size of up to 38.5 mm. These dimensions are provided for by tolerances for the Rabitz 35x35 mesh, which are prescribed in GOST 5336-80, and for OK wire in accordance with GOST 3282-74.
You should also not be afraid if the height of a roll of woven mesh 35x35 differs from the required one up to 39.2 mm.
The theoretical weight of 1 m 2 wicker mesh 35x35 is 1.76 kg.
The price of a grid the Chain-link 35_2,2 depends on order volume.
Standard mesh roll Rabitsa 35_2.2 has the following parameters:
- height 1.5;
- length 10 p.m.
Do you need a high mesh Chain-link 35x35?
Under the order the grid the Chain-link 35_2,2 can be made up to 4 m high.
To protect the edges of the woven mesh 35x35, they are wrapped with thick paper, burlap or polymer film.
Low-carbon wire with a diameter of 2.2 mm, from which the chain-link mesh 35_2.2 is made, can be coated and without it. The coating is zinc, which, according to GOST 3282-74, must contain at least 60 g/m 2 on the surface of a galvanized wire.
A mesh woven 35x35 with such a density of zinc on the surface under normal conditions will last at least 8 years before it starts to rust.
If you attach a ruler to your screen, hold down the Ctrl key and scroll the mouse wheel until the divisions on your ruler and on the image completely match - you can see how a 35x35 wicker grid looks like in full size.
To visually compare the mesh Rabitsa 35_2.2 with a wicker mesh of other sizes, go to the Gallery page .
The chain-link fence has always been considered the cheapest of the wire fences, but there is a mesh from which the fence will be even cheaper, this is the Kazachka lightweight mesh .