Grid Chain-link 25_2.5 is made of low-carbon wire with a diameter of 2.5 mm. The grid cells are square with a size of 25 mm.
This mesh can also be referred to as the Chain-link mesh 25/2.5, the Chain-link mesh 25x25, the wicker mesh 25x25.
Grid Chain-link 25_2.5 is used in many areas:
- for plaster reinforcement and reinforcement of heat-insulating materials;
- for sifting materials by size;
- making cages for animals.
Wire for the manufacture of mesh Chain-link 25 * 2.5 can be coated with zinc, or maybe without a coating. Galvanized wire according to GOST 3282-74 must contain zinc at least 60 g/m 2 .
The grid the Chain-link 25_2,5 is delivered in rolls.
A standard roll of mesh Rabitsa 25x25 is produced with a height of 1.5 m and a length of 10 linear meters.
But there are mesh manufacturers that produce rolls 12.16 and 18 meters long.
Grid rolls Chain-link 25_2.5 are connected in the middle with low-carbon annealed wire . And at the ends, the mesh 25 / 2.5 is wrapped with paper, polymer film or burlap. A wicker mesh 25x25 should not be moved a lot - the packaging deteriorates, and with it the presentation of the mesh.
Tolerances for the mesh Chain-link 25_2.5 according to GOST 5336-80:
- the cell size tolerance can be positive no more than 2.5 mm;
- mesh width tolerance and not more than 28 mm.
The wire diameter tolerance is provided by GOST 3282-74 and for 2.5 mm wire it can be no more than 0.1 mm.
Due to tolerances, the weight of a woven mesh 25x25 can differ up to 30% from the theoretical one.
The price of a grid Chain-link 25_2,5 depends on order volume.
The theoretical weight of 1m 2 of the chain-link mesh 25_2.5 is 3.18 kg.
Wicker mesh 25x25 of wire OK 2.5 mm is as follows:
The chain-link mesh 25 * 2.5 is suitable for making cages and fencing animals, and for an inexpensive fence it would be better to use a lightweight Cossack mesh .