The chain-link grid 20x20 is also called the wicker grid 20x20 and can be referred to as the chain-link grid 20x20x2, the wicker grid 20x20x2.
Mesh Chain-link 20x20 is packed in rolls, which have the following parameters:
- height 1.5 m, but if you need to buy a wicker mesh 20x20 up to 4 meters high, it can be made to order;
- the standard length of a roll of mesh wicker 20x20x2 is 10 linear meters, but some factories produce rolls of mesh Rabitsa 20x20x2 with a length of 12, 16 or 18 linear meters. Roll length is measured in tension.
Rolls of mesh Chain-link 20x20 are wrapped at the ends with paper or burlap, which tends to tear during constant transportation, so you need to be more careful with moving the mesh Chain-link 20 / 2.0, it is better not to move the wicker mesh 20 * 2.0 without apparent need.
Braided mesh 20x20 can be made of galvanized wire to extend its service life, or it can be uncoated.
Grid Chain-link 20x20 is made in accordance with GOST 5336-80 from low-carbon wire with a diameter of 2.0 mm in accordance with GOST 3282-74.
Wicker mesh 20x20, like any metal mesh , is made in accordance with GOST, has its own tolerances:
- positive cell tolerance can be no more than +2 mm;
- grid width tolerance 20x20x2 - 22.4 mm.
- Wire diameter tolerance according to GOST 3282-74 - 0.1 mm. This is the maximum possible deviation.
The amount of zinc on the galvanized mesh Chain-link 20x20x2 must be at least 50 g / m 2 .
The weight of 1 m 2 of the chain-link grid 20x20 is 2.52 kg. The price of the mesh Chain-link 20x20x2 depends on the volume of the order.
If you decide to buy a 20x20 chain-link mesh , specify the actual weight of 1 m 2 of the mesh offered to you and compare it with the theoretical weight of 2.52 kg.
Wicker mesh 20x20 is used in many areas of activity: in construction for reinforcing heat-insulating materials, for plastering, making sieves, cages for small animals.
The 20x20 chain-link mesh is not suitable for fencing territories; a fence made of such a mesh will be very expensive.
We offer you an alternative to the chain-link mesh - Cossack mesh lightweight . In order to see what the 20x20 Rabitz grid looks like, attach a ruler to the monitor, hold down the Ctrl key and scroll the mouse wheel until the divisions on your ruler match those on the screen.In order to make sure that you have chosen the right chain-link mesh, read the information on what you need to look for when buying a wicker mesh , and also look at the appearance of the chain-link mesh of various sizes .