Mesh Chain-link 20x20x1.8 is intended for the manufacture of screens for screening various materials, for plaster reinforcement, for the installation of self-leveling floors, the production of cages for small animals, partitions at enterprises.
Wicker mesh 20x20x1.8 is made of low-carbon OK galvanized and non-galvanized wire with a diameter of 1.8 mm.
In the case of wire galvanizing according to GOST 3282-74, its surface must contain at least 50 g/m 2 of zinc. True, there are some manufacturers of woven mesh 20x1.8, which galvanize the mesh so that the specific density of zinc on the surface is about 10-20 g/m 2 .
Wicker mesh 20x1.8 is supplied in rolls.
Standard wicker mesh roll size 20x20:
- height 1.5 m;
- length 10 r.m.
But rolls of wicker mesh 20x20 can be made in non-standard sizes:
- firstly, the height of the roll can be up to 4 meters;
- secondly, some manufacturers produce mesh in rolls 12, 16 and 18 m long.
The edges of the mesh roll Chain-link 20x1.8 are wrapped with paper, burlap or polymer film to avoid mesh snagging and damage. But these types of windings do not have sufficient density. With the constant movement of rolls of wicker mesh 20x1.8, the packaging deteriorates. Therefore, in order to preserve the long-term presentation of the Rabitsa 20x20 grid, it should not be moved much from place to place.
A wicker grid cell 20x20 has a square shape.
The grid the Chain- link 20х1,8 is made according to GOST 5336-80. This GOST provides for the following mesh tolerances:
- a 20x20 wicker grid cell can be made with a plus tolerance of up to 2 mm;
- grid width tolerance - up to 22.4 mm.
The theoretical weight of 1 m 2 woven mesh 20x20 is 2.15 kg. But the weight of two identical-looking rolls may not match due to tolerances.
The price of the mesh Chain-link 20x1.8 depends on the volume of the order.
In order to see how the grid Rabitsa 20x20x1.8 looks like in full size, attach a ruler to the screen, hold down the Ctrl key and scroll the mouse wheel until the divisions on your ruler coincide with the divisions on the image.
If you want to buy a chain-link mesh for the construction of an inexpensive fence, then pay attention to the lightweight Cossack mesh .
A fence from such a grid will cost two times cheaper than from a Rabitsa, both due to the cheapness of the grid itself, and the smaller number of poles required for installation. The posts are installed after 5 m, and not after 2.5 m as for the chain-link mesh.