Mesh Chain-link 100x100x5 is a woven mesh with a square cell 100x100 mm made of wire with a diameter of 5 mm.
Grid Chain-link 100xx100x5 is designed for the manufacture of gabions and strong fences.
And if you want to buy a chain-link mesh for a cheap or temporary fence, then pay attention to the alternative to the Chain-link - the Kazachka lightweight mesh .
The photo shows a grid Rabitsa 100x5.
Attach a ruler to the screen, hold the Ctrl key and simultaneously scroll the mouse wheel until the divisions on your ruler coincide with the divisions in the photo.
Thus, you will be able to see a full-size wicker grid 100x5.
The grid the Chain-link 100х100х5 is on sale in rolls.
Standard sizes of rolls of woven mesh Rabitsa 100x5:
- grid height 1.5 m,
- mesh length 5 m.
Under the order, the chain-link mesh 100x5 can be made up to 3 m high. The edges of the rolls of the wicker mesh 100x5.0 are packed in paper.
Tolerances on a woven chain-link mesh 100x5:
- on cells no more than 10 mm.
- the width of the grid is not more than -1.12 cells.
The material for the manufacture of mesh Chain-link 100x100x5 is a low-carbon wire with a diameter of 5 mm, galvanized and uncoated. Most use galvanized wire.
The specific density of zinc on a galvanized wire with a diameter of 5 mm is not less than 80 g/m 2 in accordance with GOST 3282-74. Tolerance for wire diameter of 5.0 mm is not more than 0.16 mm.
Learn more about the quality and methods of galvanizing by clicking on this link.