Polymer-coated woven mesh TM Kazachka is the best product from the category of metal mesh for fencing .
The best performance of polymer-coated woven Kazachka mesh requires the mandatory use of galvanized wire for the manufacture of polymer-coated woven mesh, which is coated with a special polymer coating.
Galvanized wire hidden under a polymer coating will last forever.
At least we have no information that it has rusted somewhere.
But if you buy an ordinary polymer-coated chain-link mesh without galvanized wire, then, of course, it will begin to rust over time in those places where moisture begins to penetrate between the wire and the polymer coating.
What is the difference between the woven Cossack mesh with PVC coating and the usual plasticized Rabitsa
Of course, the high popularity of a high-quality polymer-coated chain-link mesh could not encourage various craftsmen to produce it, who, for the same money or a little lower, offer a polymer-coated mesh netting externally, it seems. attractive, but the quality is much lower. The buyer will know about it in a year or two. Then the money has already been spent and cannot be returned.
Advantages
Does not fade in the sun and does not burst in the cold !!!
But the fact is that the usual PVC coating burns out in the sun and bursts in the cold. Therefore, for the production of polymer-coated woven Kazachka mesh, a special, not cheap polymer is used, which is nowhere to be purchased by ordinary mesh manufacturers. So they replace it with ordinary PVC, which is wrapped around wires for internal wiring, added dye to it, and get a temporarily attractive mesh of polymer-coated wire . Some people buy a polymer in Turkey for the manufacture of polymer-coated wire, which does not fade in the sun, but bursts in the cold. It's made for the southern countries. And only our company supplies woven mesh with a polymer coating , which is guaranteed (the manufacturer gives a guarantee of 7 years) withstands our frosts and does not fade in the sun. And that is not all.
Cracks in the polymer coating
For the production of polymer-coated woven mesh , special tools are needed on mesh weaving machines. These tools are not available from conventional chain- link mesh manufacturers . The tool on their machines cuts the polymer coating at the bending points of the spirals, and such a chain-link mesh with a polymer coating rusts very quickly. Ugly rusty streaks after the rains will tell the owner that he threw his money away.
How to buy a high-quality polymer-coated woven mesh
If you want to buy polymer-coated woven mesh , look at the inside of the spiral. when you see cuts, discard it. Only the reputation of your supplier and, in part, a warranty card for 5-7 years of use will save you from loss of color and cracks in the coating.