The design and dimensions of the molding nails must correspond to those indicated in the drawing and in the table.
mm
Rod diameter d | Nail length l | Head diameter D , not less than |
1.2 | fifty | 2.0 |
1.4 | 60 | 2.5 |
70 | ||
1.6 | 80 | 2.8 |
one hundred | ||
1.8 | 120 | 3.2 |
150 |
Symbol for nails with a shaft diameter of 1.6 mm and a length of 100 mm:
Nails 1.6×100 GOST 4035-63
(Revised edition, Rev. No. 1).
2. Technical requirements for nails - according to GOST 283-75.
3. Theoretical weight of nails is given in the reference appendix.
(Introduced additionally, Rev. No. 1).
APPENDIX
Reference
Theoretical mass of nails
Nail size, d×l , mm | Weight of 1000 nails, kg |
1.2×50 | 0.442 |
1.4×60 | 0.722 |
1.4×70 | 0.843 |
1.6×80 | 1.29 |
1.6×100 | 1.59 |
1.8×120 | 2.37 |
1.8×150 | 3.17 |
(Changed edition, Rev. No. 1, 2).