Buy fittings and reinforcing bars both measured and NDL.
Fittings correspond to GOST 3760-06.
Delivery and price of fittings depend
from packaging, type of transportation and distance from the buyer's warehouse to the main regions in which construction reinforcement is produced. Reinforcement is supplied in bars and coils. Packaging of building reinforcement with a diameter of more than 10 mm is carried out in bars, less than 10 mm in coils. Delivery to the regions can be carried out by open transport. For those who buy fittings from us, we will arrange transport and delivery to the buyer's warehouse.
Reinforcing steel round smooth profile is made with a diameter of 5.5 to 40 mm. Reinforcing steel of a periodic profile is produced with a nominal diameter of 6.0 to 40 mm.
Building fittings are made measured (measure) and random length (NDL). The length of the bars should be in the range from 6 to 12 m. The price of NDL fittings is less than the price of gauge fittings. Before you buy fittings, you need to clearly understand how it will be used so that you can save. If the rebar will be cut into small pieces, then it is better to buy NDL and not overpay for the dimension.
Rebar
(A-3) No. 8 ndl;
8 mm class. A500C 12 m;
A-24O dm. 8 mm long 6 m (smooth);
A400/A500 No. 8 mm;
A400 / A500 No. 8 mm;
A400 / A500 No. 10 mm;
A400 / A500 No. 10 mm unmeasured;
10 mm class. A240C 6 m;
10 mm class. A500C 12 m;
#10 L=measure (A500C);
12 m cl. A500 St3ps n/a;
A-400S-500S d-12.0 mm;
A400 / A500 No. 12 mm;
A400/A500 No. 12 mm consumer goods;
A400 / A500 No. 14 mm;
A400 / A500 No. 16 mm;
A400 / A500 No. 16 mm;
22 mm class A240C 6 m;
A-240 dm 8 mm long. 6 m smooth;
A-400s dm 8 mm long. 12m*30m;
A-400s dm 8 mm long. 12m*50m;
No. 8 mm А400-500С, measure 12 m.
8 mm length up to 6m (shorty);
10 mm A-240C measure 6 m 1500 mm;
12 mm nl. up to 6 m;
12 mm nl. up to 7 m;
12 mm А400-500С, measure 12 m;
14 mm А400-500С, measure 12 m;
A-500s dm 16 mm measure 12 m (m);
16 mm ndl. up to 6 m (shorty);
A-240 dm 18 mm long. 6 m smooth;
20 mm A400-500Sn, NDL 3-12 m;
25 mm А400-500С, measure 12 m;
We can sell you other types of fittings.
You have the opportunity to buy fittings and rolled products from us with delivery to your warehouse in the following cities:
Dnipro, Kamianske, Nikopol, Pavlograd, Donetsk region, Mariupol, Slavyansk, Lugansk region, Zaporozhye, Berdyansk, Melitopol, Vinnitsa, Zhitomir, Ivano-Frankivsk, Kyiv, Bila Tserkva, Kropyvnytskyi, Lutsk, Lviv, Nikolaev, Odessa, Poltava , Kremenchug, Rovno, Sumy, Ternopil, Buchach, Kremenets, Chortkiv, Uzhgorod, Kharkiv, Kherson,
Khmelnitsky, Kamenetz-Podolsky, Cherkasy, Chernihiv, Chernivtsi.
Building reinforcement used
for reinforcing ordinary and preloaded reinforced concrete structures, giving them stability and greater resistance. Due to its technical properties, building reinforcement binds layers of concrete, preventing the appearance of cracks and fractures in reinforced concrete structures. The price of the reinforcement required for the structure depends on its Ø, class, dimension and other factors.
Among consumers, the sale of smooth and profile fittings is in greatest demand:
- А240С - rolled products with a smooth profile (it is a round smooth profile);
- AZ00S, A400S, A500S, A600, A600S, A600K, A800, A800K and A1000 - rolled products with a periodic profile (it has corrugated profiles on the surface, which are located at an angle to the longitudinal axis. The main advantage of corrugated building reinforcement compared to smooth is more strong adhesion to concrete, its use provides a more reliable design).
Construction fittings have their own marking
which also reflects additional properties, the letters "B" or "T" may be added to the index. The index "B" means that this type of reinforcement is strengthened by a hood, and the index "T" means that it is thermally strengthened.
Building reinforcement is designated by the index A, and is divided into 6 classes (depending on the thickness and steel grade):
- A-1 (A240C ) - rolled products with a smooth profile, Ø 6 - 40 mm. For the production of class A-1, steel grades 3SP, D16, and St3 (StZkp; StZps; StZsp) are used. A-1 tolerates low temperatures well, is quite ductile and has an increased tensile elongation value, and has high weldability. The main purpose of this class of fittings: welding of load-bearing structures.
- A-2 (A300S ) - rolled products with a periodic profile, Ø 10-80 mm. In the production of A-2 fittings, steel grades St5sp, St5ps (for products with a diameter of 10-40 mm), and 18G2S - (for products with a diameter of 40-80 mm) are used. The technical characteristics of A-2 are similar to those of A-1. However it should be noted that products made of St5 steel, with a diameter of more than 32 mm, become brittle at the joints during welding.A-2 reinforcement is used for the construction of frames, as well as for welding the road mesh.
- A-3 (A400S, A500S ) - rolled products with a periodic profile, Ø 6 - 40 mm, which is made from steel grades: St3, 25G2S, 35GS, A400, A500S. The main characteristics of this type of reinforcement include good weldability. Rebar of this class is used to create transverse elements in the manufacture of reinforced concrete structures. The most common at present is the fittings of class A-3, with diameters of 10, 12, 16 mm. This is due to the fact that they have high strength and ductility. In addition, it can be connected both with a knitting wire and by welding. When welding class A-3, with diameters of 10, 12, 16 mm, there is practically no destruction of joints. In addition, modern technologies of thermomechanical hardening have made it possible to significantly reduce the price of reinforcement. A-3 class - the leader of sales.
- A-4 (A600, A600S, A600K) - rolled products with a periodic profile, Ø 10-32 mm. For the production of A-4 fittings with a diameter of 10-80 mm, steel 80C is used, and with a diameter of 10-32 mm - 20KhG2Ts. Building fittings of the fourth class have worse weldability compared to fittings of classes A1-A3, therefore, it is recommended to use the so-called method for joining them. "compressed clip". Reinforcement A-4 is usually used as prestressing reinforcement for creating frames, rolled and flat meshes.
- A-5 (A800, A800K) - rebar with a periodic profile, 6-36 mm in diameter, made of steel grade 23X2G2T. As well as fittings of the fourth class A-5, they are used in the role of strained. The technical characteristics of steel allow the use of A-5 in long structures (with a clearance of more than 12 m.) For joining along the length of the rods by welding or in the case when anchors or embedded parts are welded, it is allowed to use steel of classes A-4, A-5, A -6 (grades 20KhG2Ts, 23Kh2G2T, 22Kh2G2AYU, respectively).
- A-6 (A1000) - rebar with a periodic profile, with a diameter of 6-32 mm. In the production of this class, steel is used, grades 22X2G2AYU, 22X2G2R, 20X2G2SR. Reinforcement of this class is the most durable and is used as prestressed rods.
